|
The MUTARS® revision system provides : different CCD-angles, anatomically shaped stems, microporous surface, high primary stability because of distal anchorage, modularity, correction of the antetorsion in steps of 5° after implantation, simple surgical technique.
proximal (metaphyseal) components
The MUTARS® RS system offers four different proximal components in length of 32 and 42 mm with a 12/14 taper. Both components are available in neck angles of 127° and 135°. Metaphyseal components are available in length of 40 mm and 50 mm. To build up an extra long stem up to three extension pieces of 25mm length each are available. The modularity of these components allows the optimal adaptation to the Proximal Femur without changing of the diaphyseal stem position. |
|
distal (diaphyseal) components
The MUTARSÒ RS system includes 11 stems in three different lengths of 150, 200 and 250 mm. The stems of 150 and 200mm lengths are available in diameters of 14, 16, 18 and 20 mm. The design of the 200 mm stems (16, 18, 20mm) and 250 mm stems (18, 20 mm) includes two distal locking holes are available in diameters of 16, 18 and 20 mm. For the cementless revision procedure of a femoral stem a precise surgical technique is essential. The goal is to retain as much of the bone structure as possible to achieve a excellent primary stability. |
|
